HOW TO USE
Application
Shake well before use. Apply a generous coat of Fine Wood Stripper using a brush.
Allow the stripper to work for five to 30 minutes. Remove the dissolved finish using a Plastic Scraper or Steel Wool (Grade 2/0) for carved areas. It may be necessary to repeat the process if more than one finish is to be removed. Neutralise the timber by cleaning with Wax and Polish Remover or white spirit. Leave to dry for 24 hours then rub down gently using Ultra Fine Steel Wool (Grade 0000) or extra fine sand paper. The treated surface is now ready for a new finish.
Important
Always test products on a spare surface or inconspicuous area for colour, compatibility and end results.
Precautions
Wear protective gloves.
Do not use in direct sunlight.
Avoid contact with vinyl and synthetic surfaces.
500ml
2-5m²
Interior
Working time 5-30mins
Brush
Water
