JET Lathe JWL-1221VS Wood

Manufacturer: JET
Temp out of stock :
Massive cast iron frame with stand as an optional extra An electronic speed control system Digital speed display Reversing switch 3-speed belt drive Tensioning and loosening of the drive belt with a ratchet lever Dividing device Eccentric fixation of the headstock and tailstock JWL-1221VS is the representative of a new generation of professional Jet lathes, combining state-of-the-art control electronics and an improved mechanical part. In comparison with the previous model (JWL-1220), the rigidity was significantly increased: the frame with a similar length became wider, and the total weight increased by 10 kg; more powerful spindle bearings are used. For the machine bed and stand, you can buy extensions, in this case the maximum center-to-center distance will increase to 1080 mm. Transmission of rotation from the engine to the spindle is performed by a 6-riveted poly-V-belt, three pairs of pulleys are provided to select the power transmission range. The belt is rearranged without the use of an auxiliary tool: the tension is controlled by a ratchet-operated lever. Eccentric fastening systems for the pod and the tailstock make their settings as simple and fast. The machine is equipped with a dividing device with a spring-loaded spindle locking pin, which also simplifies installation / dismantling on the faceplate spindle (this requires only one key). The speed can be adjusted with the built-in electronics, with the selected value displayed on the digital display. On the control panel there is also a reverse switch, which is indispensable for some types of work, for example, when grinding.
Availability: Out of stock

Model JWL-1221VS
Article (230 V) 719200M
Consumed (output) power 0.94 (0.73) kW
Spindle speed at idle speed 60-900, 110-1800 and 220-3600 rpm
Diameter of rotation above the bed 318 mm
Diameter of rotation above the support 240 mm
Distance between centers 520 mm
Lengthening of the frame 560 mm (option)
Cone of spindle MK-2
Spindle thread M33 x 3,5
Cone of tailstock MK-2
Backing of the rear tank 57 mm
Number of positions of the dividing device 24
Overall dimensions (LxWxH) 853 x 280 x 450 mm
The weight 55 kg